Hydraulic Oscillator

Description

Hydraulic Oscillator

Hydraulic oscillator is a downhole tool used to solve bottom hole drag and improve the transmission of drilling pressure. It is especially suitable for directional wells, extended reach wells and horizontal wells. It can be used in conjunction with MWD, downhole power drilling tools and any bit.

The hydraulic oscillator is made of all-metal materials including power components. The main parts of the tool do not contain rubber components. It is widely applicable to various drilling conditions. It can also be used normally in high temperature wells, oil-based mud, saltwater formation and other conditions where conventional tools are not suitable.

Main Product Specifications:

Specifications	6-7/8”OD
Applicable displacement/pressure fall	20 l/min- 37l/min/0.5-1.5Mpa
Overall length	3.2m
Working frequency	13-20 Hz@800-1200
Maximum working temperature	Basically unlimited
Connection thread	NC50
Oscillating force	30-47KN
Amplitude	3-15mm

Specifications	8”OD
Applicable displacement/pressure fall	40 l/min- 55l/min/1.4-2.4Mpa
Overall length	3.2m
Working frequency	14-23 Hz@900-1400
Maximum working temperature	Basically unlimited
Connection thread	NC38
Oscillating force	48-57KN
Amplitude	5-12mm

Specifications	8”OD
Applicable displacement/pressure fall	50 l/min- 75l/min/1.5-2.4Mpa
Overall length	3.2m
Working frequency	14-23 Hz@900-1400
Maximum working temperature	Basically unlimited
Connection thread	NC38
Oscillating force	48-57KN
Amplitude	5-12mm

Note: the working frequency and amplitude could be adjusted as per the customer’s request.