Español
Description
Composite Flocculant
There are two kinds of composite flocculants are manufactured in our plant. One is composed of A and B, the other is composed of A, B and C. They are both prepared by polymers and inorganic salts. Since these flocculants can remove the oil and suspended solid, they are used to treat produced liquid in oilfield and the sewage.
ü The flocculant has obvious effect in removing the oil and suspended solid at relatively low dose.
ü The flocculant has a wide range of application. The price is reasonable.
The flocculant can be used to remove the suspended solid and oil in the produced liquid in oilfield and sewage. When use, inorganic flocculant is usually first applied, then the organic flocculant is added. The additive dosage can be adjusted by the output water quality.
Main Technical Data
Item | Index | |
A | B | |
Exterior | Homogeneous liquid or solid powder | Homogeneous liquid or solid powder |
Freezing point，℃ | ≤-10 | ≤-10 |
Solubility | Soluble in water | |
Oil removing effect（40mg/L） | ≥80% | |
Suspended solid removing ratio（40 mg/L） | ≥55% | |
Organochlorine | None | |
Item | Index | ||
A | B | C | |
Exterior | White slurry | White solid powder | Light yellow or transparent liquid |
pH（1% water solution） | 10.5-12.5 | 7.5-9.5 | 2.0-4.0 |
Density，g/cm3 | 1.10-1.40 | - | 1.10-1.40 |
Undissolved substance in water，% | - | - | ≤1.0 |
CaO，% | ≥15.0 | - | - |
Oil removing ratio，% | ≥80 | ||
Suspended solid removing ratio % | ≥50 | ||
Organochlorine | none | ||
